Conrad Johnson discontinued to use tapped output transformers when Premier 8 was introduced. Outputs were matched for 4 ohm load as standard, at least when Premier 8, 11 and 12 were in production. There was also option to match output for 2, 8 or 16 ohm load, at least when Premier 140 was in production.
However my Premier 11A does have 8 ohm written on shipping carton. So, it is most likely that this amp has been originally delivered with 8 ohm load matching. As there was no actual proof for this, I sent e-mail to address on the CJ homepage asking about color codes of transformer secondary wires and how the different loading options are connected. I was quite surprised as I never got answer from Conrad Johnson to my question.
It is nice as this site has been created and most likely there must be some inside information about this issue. So... do anybody know how different loading options were connected when Premier´s in question were produced? How secondary taps were connected for different loads, where feedback was taken and were feedback resistors and caps same for all connections?
Best Regards
Kimmo
Premier 11A output transformer connection
-
- Master Apprentice
- Posts: 201
- Joined: Mon Aug 06, 2012 1:10 pm
- Location: Phoenix, Arizona USA
Re: Premier 11A output transformer connection
Tin-eared audiofool, large-scale-Classical-music lover, and damned-amateur fotografer.
William Bruce Cameron: "...not everything that can be counted counts, and not everything that counts can be counted."
William Bruce Cameron: "...not everything that can be counted counts, and not everything that counts can be counted."
Re: Premier 11A output transformer connection
Jeffreybehr,
I think can be useful to others as well so I'm going to add it to the Manuals/schematics database. Thanks!
By any chance, do you know if this applies to other units in addition to the Premier 11/12/MV60?
I think can be useful to others as well so I'm going to add it to the Manuals/schematics database. Thanks!
By any chance, do you know if this applies to other units in addition to the Premier 11/12/MV60?
-admin
Home Theater in Member Gallery
Main stereo: ART Amplifier and ET7s2. 2nd stereo: PV-14L and MV-55. Previously Owned: PF2 preamp, Evolution 2000 Amp, PV-12AL preamp, D/A-2b Vacuum-Tube Digital Processor.
Home Theater in Member Gallery
Main stereo: ART Amplifier and ET7s2. 2nd stereo: PV-14L and MV-55. Previously Owned: PF2 preamp, Evolution 2000 Amp, PV-12AL preamp, D/A-2b Vacuum-Tube Digital Processor.
-
- Master Apprentice
- Posts: 201
- Joined: Mon Aug 06, 2012 1:10 pm
- Location: Phoenix, Arizona USA
Re: Premier 11A output transformer connection
admin wrote:Jeffreybehr,
I think can be useful to others as well so I'm going to add it to the Manuals/schematics database. Thanks! Have at it, and YW.
By any chance, do you know if this applies to other units in addition to the Premier 11/12/MV60? I have no idea.
Tin-eared audiofool, large-scale-Classical-music lover, and damned-amateur fotografer.
William Bruce Cameron: "...not everything that can be counted counts, and not everything that counts can be counted."
William Bruce Cameron: "...not everything that can be counted counts, and not everything that counts can be counted."
Re: Premier 11A output transformer connection
Thank you for your good advice.
Are feedback loop 47p pahase compensation cap and 2 pc paralell 5,11K feedback resistors same for diffrent loads. Is feedback taken for all loads from yellow tap, where speaker positive is connected?
It is good idea to store this information to some place where it can found.
Best Regards
Kimmo
Are feedback loop 47p pahase compensation cap and 2 pc paralell 5,11K feedback resistors same for diffrent loads. Is feedback taken for all loads from yellow tap, where speaker positive is connected?
It is good idea to store this information to some place where it can found.
Best Regards
Kimmo
Premier 11A output transformer connection
Hey Doug
Oh transformer king,
Would this beast work for a drip 175b output?
Thanks
G
Oh transformer king,
Would this beast work for a drip 175b output?
Thanks
G
Re: Premier 11A output transformer connection
Hi Is the same transformer connection charts for my premier 140 power amp? Thanks
-
- Regular
- Posts: 13
- Joined: Sat Jul 09, 2016 5:35 pm
- Location: Oslo
Re: Premier 11A output transformer connection
When i bought my PR11A in 1995, my dealer recommended to have the 8 ohm configuration just because it sounded better according to him. I couldn't verify that myself, so I just had to trust my dealer. At the time I used 4 ohms Maggies, so I was a bit concerned, but it all turned out well. No problems wyth Maggies, nor with Audio Physics Virgo III (6 ohms), or my current Sonus Faber Elipsa which are 4 ohms.