Hi all,
This is my first post.
I am the proud owner of a ET3 preamp and Classic 62 SE amplifier.
Some how when I unpacked the boxes and started to put the tubes in I managed to drop one of the KT120 tubes.
As I'm sure you can imagine my frustration with myself is... well
What would be the best course of action, would I need to replace all the KT120's so they are matched?
Im eagerly waiting to here this system fired up, probably my haste was to my detriment. An expensive lesson in patience!
Any advice would be appreciated.
Julian
CJ Classic 62SE broken tube!
Re: CJ Classic 62SE broken tube!
Just get a new single tube. You don't need matches tubes in the Classic 62. Get a good tube from a reputable source.
ronenash
----
Power:CJ ART150, Beard P100, McCormack DNA500, Krell FPB300
Pre:CJ ACT2.1, Pr14, Pr15
Analog:VPI Classic/Falcon/SoundSmith Denon 103R, Lenco L75 rebuild
Digital:J.River-->Chord 2Qude
Speakers:SF Amati Futura
----
Power:CJ ART150, Beard P100, McCormack DNA500, Krell FPB300
Pre:CJ ACT2.1, Pr14, Pr15
Analog:VPI Classic/Falcon/SoundSmith Denon 103R, Lenco L75 rebuild
Digital:J.River-->Chord 2Qude
Speakers:SF Amati Futura
Re: CJ Classic 62SE broken tube!
Thanks for the reply.
Just looking for tubes at the moment.
Just looking for tubes at the moment.
Re: CJ Classic 62SE broken tube!
That must be so frustrating. Hope you get it sorted out soon. Anyway congratulations on your new CJ gear.
When you get your new tube, make sure you follow the "Adjusting Output Tube Bias" section of the manual.
Anthony
When you get your new tube, make sure you follow the "Adjusting Output Tube Bias" section of the manual.
Anthony
Re: CJ Classic 62SE broken tube!
Hola. I get my tubes at www.thetubestore.com They have full stock and different brands of tubes. The price is about the same everywhere. Usually there is an explanation about what each tube does to the sound. Mostly the tubes are used on guitar or bass amplifiers, so the explanation could describe how the instrument sounds.
as ronenash said, because each tube on the amplifier has a bias control, there is no needed to be a matched pair.
Happy listening!
as ronenash said, because each tube on the amplifier has a bias control, there is no needed to be a matched pair.
Happy listening!
ML CLX BF-210 Stage X Motion 4. CJ 120SE amp ET7V2 pre, Holo May Kte Dac. Mac Pro. Power Cond. BPT Signature+ 3.5, Gaia II Feet. USB Lush^V3. Nordost SPM IC and Spk. Shun Mook, BCanto CD2 CD3. Linn LP-12/Unitrack tonearm/Denon DL103R MC.
Re: CJ Classic 62SE broken tube!
Thanks guys.
Got one coming!
Got one coming!
-
- Ultimate
- Posts: 2357
- Joined: Sun Sep 07, 2014 6:30 am
- Location: Melbourne, Australia
Re: CJ Classic 62SE broken tube!
Hey mate,
did you manage to get another KT120 as yet?
if so, great! and don't forget to bias as suggested. Not too sure where you're located but if you happen to be in Aus down unda, we have our very own CJ importer / dealer in Melbourne, Sound Reference. Just call up Damien and he'll gladly help, Good mate of mine.
Cheers & have a good one,
RJ
did you manage to get another KT120 as yet?
if so, great! and don't forget to bias as suggested. Not too sure where you're located but if you happen to be in Aus down unda, we have our very own CJ importer / dealer in Melbourne, Sound Reference. Just call up Damien and he'll gladly help, Good mate of mine.
Cheers & have a good one,
RJ